SSP’s unique dual Press to exit and emergency door release serves two key functions without the need for extra wiring. First and foremost it acts as a Request to exit button. When pressed it will open the door for the time that the button is held down. In addition, in the event of an emergency or for a predetermined one-off event, the break glass unit can be pressed to permanently release the door.
The functionality of both switches is as follows:
DOMED PUSH BUTTON
This robust exit button is designed to release a door (magnetic locks) while the button it pressed. Put another way, as soon the operator releases this momentary release button the door should lock immediately (if it is in the closed position).
Easy to press button Being domed, the mushroom button is easy to locate and activate
Reliable and durable Tested to exceed 1 million separate uses
Stainless Steel for best possible finish Stylish stainless steel will look good in any area of the building
No extra signage needed The words Press to exit are printed on the aesthetically pleasing stainless steel surface of this button. The standard safe condition/evacuation green is used to ensure the button is easily located.
Specifications
Load: 4A @ 30V AC/DC
Switches: < 30volts DC/AC
Changeover: NO (Normally Open) / NC (Normally Closed)
The lower half of this unit mimics the feel of breaking glass without the owner having to go to the cost and trouble of replacing the glass once it has been depressed. Being 100% re-usable, all the owner/operator has to do is simply insert plastic key provided into the front to reactivate the unit.
You can easily tell when button is activated Invariably when this break glass unit is activated it permanently unlocks a door until the unit is reset. To draw the attention of the a responsible person, an LED light will flash, a yellow line will appear on the unit and a buzzer will sound (buzzer can be set not to activate if this is a step too far for you or your client). To reset, simply use the key provided. Spare keys are available from the link below.
Prevent accidental activation To prevent accidental activation of the unit and to deter malicious activation of the button, Door Release section comes with its own protective cover. This can be removed if you would prefer.
Reliable and durable Tested to exceed 1 million separate uses
Size: 90mm wide x 160mm high x 63mm deep Material: Plastic dome, steel plate, plastic back box
Delivery: 2 days on average
Why buy from SSP Direct? Established in 1999, our team has over 50 years of security and safety experience between us. This experience really counts when it comes to manufacturing or sourcing our extensive product range - with the savings we make being directly passed on to you at some of the UK's lowest online prices.
Alison B.
Tue 14th May 2019
Thank you for your email. We decided to buy products from SSP Direct as there appeared to be a good choice/selection of the items we were looking to buy. Products and availability were good. Service provided was fast and efficient. Overall rating we would give 5. Hope this helps.