Where the front door currently has a mortice lock, this unique access control system has all the professional installer will need to set up an access control system into the building.
In addition to a fail secure electric release mortice lock, press to exit and break glass units, this system has a programmable power supply unit and an external reader that can be positioned outside the building. Supplied with 5 key fobs, more fobs can be bought from the links below.
In essence, this kit is designed so all you will need to supply is the cabling and installation knowledge
Contents of the kit:
Power supply with built in keypad/proximity reader
Saving time and money on additional wiring, this product is designed to make installation of an access control system quick and easy. This impressive system will take up to unique 500 users. Your clients can gain entry by either entering a code or through presenting a key fob or key card to the main unit. Keyfobs and Cards are available in the related products below.
The aspects that set this product apart are:
- Utilises switchmode technology
- Constructed from white powder coated, robust, mild steel
- LED Indicators to show mains supply and battery output.
- Separate fused mains connections
- Full electronic protection
- On board tamper protection
- Utilising switch mode it converts power more efficiently
- Has multiple cable entry, including at the rear of the unit
- Power supply with integrated keypad
- Input for external reader
- Allows up to 500 users
- 13.8VDC regulated output (1amp)
- Can be supplied in 2amp or 3amp upon request
- Additional battery charging
- Compliant to EMC EN61000-6-1 & 3
- Can house a battery up to 12V 9Ah
External IP65 Reader
This kit also comes with an additional reader for no extra cost. The additional reader gives the installer the opportunity to move the power supply/keypad out of the reach of all users. Alternatively, they can site the additional reader outside the door for entry into the building.
- High impact plastic reader for external use
- Fully encapsulated to IP65
- 9-12VDC @max 50Ma
- 26 bit EM formatted reader
- Wiegand 4 wire connection
- Card read time of 120mS
- Operating frequency 125kHz
- Maximum transfer distance of 100m (screened cable)
- Operating temperature -20c to 60c
Fail Secure Electric Release Strike
- Use with Access and Door entry systems
- Suitable for metal, and wooden doors
- 12v AC/DC (Intermittent use only)
- Euro style release
- Apply power to Open
- Internal use
- Fail-secure mortice lock
Key Fobs
5 proximity fobs
Door Release Button
- Tested to exceed 1 million separate uses
- Stainless steel plate: 85mm high x 85mm wide
- Load: 4A @ 30V AC/DC
- Switches: < 30volts DC/AC
- Mounting: Flush or surface with back box
- Material: Plastic dome, steel plate, plastic back box
- Fixing: Single fixing and wiring point
- IP Rating: IP 66
- Double Pole: NO (Normally Open) / NC (Normally Closed)
Break Glass Call Point
- Voltage: 12vdc @ 15mA / 24vdc @10mA (Selectable)
- Load: 4 Amp @ 30vac/dc
- Size: 88mm wide x 88mm high x 51mm deep
- Double Pole voltage free contacts
Delivery: 1-2 working days
Why buy from SSP Direct?
Established in 1999, our team has over 50 years of security and safety experience between us. This experience really counts when it comes to sourcing / manufacturing our extensive product range - with the savings we make being directly passed on to you at some of the UK's lowest online prices